Product Details

This product is no longer available and has been replaced by the IP7‑FX – IP Intercom and Paging Amplifier.

The IP7‑SE8 is an 8‑watt, half‑duplex IP paging amplifier that can be used both as an amplifier for one or more speakers and as an intercom for high‑noise environments.

• Supports call stations with a separate speaker and microphone
• To support “single‑transducer” mode (the speaker is used as both a speaker and a microphone), add the IP7‑MSR‑BRD microphone switching relay
• Can supply up to 8 watts into a single 8‑ohm speaker
• Can drive one or more speakers over a 70V distribution line

Additional capabilities include:

• Software‑controlled onboard dry‑contact relay with normally open and normally closed terminals
• Terminals to connect to a call station’s call button
• Software‑controlled input sensor terminals
• PoE‑ready primary network RJ‑45 connector
• Secondary network RJ‑45 connector to connect a second IP device to the network
• Patented Fail‑Forward redundancy technology

Compatible with TalkMaster software and SIP 2.0 phone systems.tems.