April 2010

• TMEE V2.0 SP1 is available 

October 2009

• TMEE V2.0 is available 
• IP7 Firmware V5.3.3.22 is available
• ii3 NIC Firmware V3.68.36 is available

April 2009 

• TMEE V1.4.2 is available
• IP7 Firmware V5.3.1.2 is available

January 2009 

• TMEE V1.4 SP6 is available / TalkMaster LE V1.9.3.10 is available

TMEE Server

• Prevent crash and return proper Response Code to the Console if the correct audio protocol is not observed
• Delete the Call Queue entry for an endpoint that disconnected during a call
• Ensure the Disconnect Event is always sent to the Consoles

Admin Console

• Improved the function to REPLACE an Intercom.   After updating to the new release, the Admin Console should be opened to the Intercoms tab and the FIND ALL button pressed.  If the Intercom is able to respond with its configuation, the configuration will be saved for future REPLACE operations 
• Duplicate Intercom Discovery responses from unconfigured Intercoms.  This prevents changes being being erased while keying in the configuration of the new endpoint
• On the Intercoms tab, allow the ST/ADA option to be selected regardless of the position of the ST-MIC switch

Operator Console

• Fixed the "Stop File" function so a currently playing wav file could be cancelled
• Prevented a "hang" condition that required a restart of the Operator Console
• Process new Response Codes received from the TMEE Server
• In the Setup Volume mode, fixed the "Stop Test" function so a currently playing test file could be cancelled
  

SIP Media Gateway Console

• Correctly REGISTER an endpoint that does not have a password set on the SIP server.  This caused an issue if the Intercom called a SIP Phone and the SIP Phone never answered the call
• Fix for a REGISTER that expired in less than 300 seconds
• Fixed an issue that was causing degraded audio quality 

TMEE Server

• Added support for Server based Groups and Messages
• Added Text-To-Speech capability for supporting 3rd party products which send text messages to Intercoms/Paging Endpoints
• Added RTP support for 2-way Intercom communication
• Enhanced memory usage used for Intercom threads 
• Added additional error and buffer overflow checking to enhance system stability
• Decreased CPU usage during network retry operations
• Updated the USB License Key driver to version 7.5

Admin Console

• Added the ability to add pre-recorded Messages for 1-way paging
• Added the ability to define paging Groups for 1-way paging and associate prerecorded
  Messages with each Group
• Added the ability to assign Groups to Operators. When an Operator logs on to the
  Operator Console, the Groups and their associated Messages are included on a
  new tab used for 1-way audio paging
• Added the ability to select the voice used in 3rd party Text-To-Speech applications
• Added an Update Now option to the bottom of the screen to dynamically send most
  Admin Console updates to the Server and Operator Consoles without needing to
  restart the TMEE Server service
• Added an option to use the RTP protocol instead of the TCP/IP protocol to send and
  receive 2-way Intercom audio
• Added a Managed check box to Intercom/Paging Endpoint configuration to authorize devices added to the system
• Added a Replace option on the Intercoms tab to copy the configuration of an existing endpoint and replace it with a new endpoint
• Added the ability to Disable the Intercom's AGC (Automatic Gain Control) and
  manually set the Mic Gain in the Options2 tab of the Intercoms tab
• Added the ability to specify the default Microphone codec to be used when the IP7's Talk switch is engaged

Operator Console

• Added a new Groups tab that allows an Operator to select a pre-defined Group of
  Intercoms/Paging Endpoints and send them a pre-defined audio Message
• Added the ability to sort on the Status column in the Intercoms tab in addition to the
  Location, Queue and IP Address
• Added support to Call an Intercom with the HS-x1 Handset installed
• Removed the option to display the System Events window to simplify the user interface
• Improved Console shutdown when an outstanding operation is pending
• Corrected miscellaneous errors

• Added the ability to perform Intercom (2-way audio) via RTP (Real Time Protocol).  Refer to the Intercom Configuration section in the TMEE Admin Console manual
• Added support for connecting HS-x1 Handsets to the IP7.  Calls are placed when the Handset is picked up. The TMEE Operator Console can “ring” the Handset by pressing the Call button
• Changed the Door Open Relay to be active for up to 255 seconds
• Added the ability to disable AGC (Automatic Gain Control) on the Intercom's microphone and manually set the microphone gain. 
• Only process the “end of page” command for the audio page currently being played
• Properly shut down the speaker at the end of an audio broadcast  

• This release is recommended for use with TMEE Server. It is not recommended for use with TalkMaster LE or for Direct Mode
• If connected to the TMEE Server and the “find intercoms” or “configure intercoms” commands are received, respond to the IP Address which issued the command instead of to the Broadcast address (255.255.255.255). This allows the Admin Console to configure ii3 Intercoms connected in remote subnets if they are currently connected to the TMEE Server and not behind a NAT’d firewall
• Added the Endpoint’s ICOM ID  to create a unique Host Name when obtaining an IP address via DHCP
• When not connected to the TMEE Server, attempt server connection less often (every 5 seconds)
• Only process the “end of page” command for the audio page currently being played

April 2009
TalkMaster Enterprise Edition V1.4.2 Released

TMEE Server

• Added supoport for receiving/passing the new "Relay Deactivated " Event
• Corrected a corruption/crash issue when creating the new day's Audit log 
• Correcect an issue caused by repeatedly disconnecting/reconnecting intercoms

Operator Console

• Adjusted code for the new "Relay Deactivated" event

Operator Console

• Added support for the new "Relay Deactivated" event to end the "Door Open" status

Admin Console

• Corrected a crash during periods of heavy activity

• Added support for Digital Acoustics Network Music 
• Added support  for using the IP7 as a "Server" in "Direct Mode"
• Added support for new IP7 Desktop Models
• Adjusted the "Line In"  to a lower level to prevent audio distortion
• Corrected an issue where the Network would sometimes not reset after loosing connection to the Server
• Corrected an issue where the USB Diagnostic Port was not always recognized 

January 2009
TalkMaster Enterprise Edition V1.4SP6 Released

TMEE Server

• Improved tracking log readability

Operator Console

• Fixed issue caused by very rapidly moving from one intercom session to the next

Admin Console

• Fixed screen redraw when Admin Console was minimized and TMEE Server was restarted

• Added new configuration options for IP7 Desktop Intercom series